Duotone Insert Pad 2025

Caring for Duotone Insert Pads

Rinse the pads with clean fresh water after every saltwater session, and let them dry completely in the shade – avoid prolonged exposure to direct sunlight. Do not touch the 3M adhesive or inserts with sharp objects, and do not use chemical cleaners or solvents, as they can break down the glue and material.

Regularly check that the footstrap screws are properly tightened and that the pads are firmly attached to the board. Store the pads dry, cool, and flat – for example, in your board bag – away from extreme heat and direct sunlight when not in use. If you remove the pads from the board, carefully remove any excess adhesive residue according to the board manufacturer’s instructions.

What are Duotone Insert Pads 2025, and what are they used for?

Duotone Insert Pads 2025 are pads with integrated inserts that you glue directly onto your kiteboard, so you can screw on footstraps. They let you ride with straps even if your board doesn't have inserts built in at the factory.

How many pads come in the package?

You get two insert pads in a set, along with all the hardware you need to mount your footstraps.

How thick are the pads?

The pads are 4 mm thick and fit on top of your traction pad, so the strap screws sit securely in the inserts.

How do I install Duotone Insert Pads?

Clean the area on the board, position the pads where you want your footstraps, and press them firmly into place using the strong 3M adhesive backing. Then simply screw your footstraps onto the inserts - all the accessories are included.

Are Insert Pads compatible with my board?

The pads are only compatible with Duotone traction pads and boards from the SS25 series onward. Older boards and traction pads from previous seasons aren't compatible with this system.

Can I remove the pads after they've been glued on?

Yes, but they're designed to stay in place. If you remove them, be careful when loosening the 3M adhesive, and note that some adhesive residue may need to be removed carefully.

How do I best care for my Insert Pads?

Rinse them in fresh water after use in salt water, let them dry in the shade, and check regularly that the screws are tight. Store them in a cool, dry place when not in use.