Duotone Ultra Grip (Quad) 2026

As with our SUPER_HERO D/LAB sails, our goal was to create real game changers with our new wave board range.

What we learned from developing the SUPER_HERO D/LAB is that you need to work on every aspect to make a truly significant improvement.

Switching our board technology from the industry-standard semi-custom technology to our exclusive FULL CUSTOM PRODUCTION laid the foundation for everything that followed (see TECH AND SHAPE DETAILS below for details). This technology took our weight-to-strength ratio to a whole new level. And it finally allowed us to make every single prototype in the factory, just as we’ve been doing with our sails for over 30 years. Because the best prototype is worth nothing if it can’t be reproduced or feels different because of different materials, processes, or weight.

To achieve a similar leap in 3D design, we decided to have our own CAD program written. Compared to the industry-standard Shape3D software, our AI_BOARD_3D program is much more accurate and lets us perform even super-complex shaping tasks like the brand-new SYNCED CURVES CONCEPT.

DESIGN GOALS SHAPE DETAILS

Our main goals were to create designs with a maximum range of use that are easier (less exhausting) and more radical on the wave.

Basically, we wanted to create a more stable platform that’s great for getting going and going over white water. But at the same time, the boards should turn even more radically when going down the line - two opposing features that you usually can’t combine.

Here are the 3 major shape details our team has developed over the last 2.5 years (see TECH AND SHAPE DETAILS below for all the other details):

STABLE YET RADICAL CONCEPT

Our wave boards are 1-2cm wider than most other boards.

• The increased width creates a more stable platform. This makes our wave boards as stable and energy-efficient as a board that’s 5 liters bigger when drifting/floating and going over white water. 
• Most importantly, the additional width creates a more pronounced outline curve. This improves maneuverability, allowing the board to turn as radically as a board that’s 5 liters smaller. 

The result is an unbeatable broad range of use.

3-STAGE ROCKER

Unlike the usual continuous rocker curve, our entire shape concept is based on a segmented rocker line. This accounts for the fact that bottom and top turns are two completely different maneuvers. You initiate the bottom turn more over your front foot (depending on the size of the wave), while the top turn is sailed only over the back foot. This change in posture is the biggest challenge, especially when learning to ride waves - which is much easier with our 3-STAGE ROCKER.

1. The straight rocker section between the front and back straps creates a super-stable sailing stance/platform, so you’re perfectly in sync with your board when sailing out or on the wave as you switch between bottom and top turns.
2. The nose rocker starts just in front of the front straps, helping engage the front part of the rail when leaning forward into the bottom turn.
3. KICKSTARTER TAIL: The tail rocker behind the back strap remains very moderate until the last 4-5cm from the tail, where it transforms into a progressive tail-kick. This tail-kick creates a perfect water release and, combined with the flat rocker line, results in kickstarter-like acceleration as soon as you push a little with your back foot. Plus, the tail-kick obviously allows for super-tight top turns when snapping the board back with your back foot.

SYNCED CURVES CONCEPT (rocker>

Outline, rocker and rail shape are the 3 key elements that determine how a board feels and performs. Every rocker and outline has areas with more or less curvature. The same applies to the degree of rail curvature, which varies considerably. To prevent the 3 curves from working "against" each other, the highest priority is to synchronize them. This means that in areas with increased rocker curvature, the outline curve is also increased, and the rails have increased curvature, and vice versa.

• Increased outline curve, nose rocker and rail curvature around the mast track make it easier to initiate the bottom turn (initiated with the front foot)
• Increased outline curve, tail rocker and rail curvature behind the back strap for more radical top turns (initiated with the back foot)

To our knowledge, this complex 3D task can only be performed by our own AI_BOARD_3D software.

We started testing this concept on existing boards, and the improvements were so significant that we incorporated this design feature into all 2026 boards.

Both ULTRA GRIP and GRIP are designed as World Cup Wave boards to satisfy the best of the best in all kinds of conditions and spots around the globe. Here are the differences:

A. ULTRA GRIP

Focus ground swell windy Euro waves (not for onshore conditions)

Ideal for Maui, Capetown, Brittany, Cabo Verde, Ireland, Chile, Mauritius

B. GRIP

Focus Euro waves logo-high ground swell

Ideal for Klitmøller, Canarias, North Sea, Kanaha

YOUR NEW ULTRA GRIP IS READY AND WAITING FOR YOU TO UNLEASH YOUR POTENTIAL!

(incl. fin)