Duotone Handle Fusion Set (2pcs)

Maintenance of Duotone Fusion Handles

S prolong your handle set's life with fresh water after every session, especially after use in salt water, and then dry it in the shade at room temperature.

• Cleaning: Rinse the handles with fresh water and wipe them with a soft cloth. Avoid abrasive cleaners, solvents, and high pressure, as these can damage the carbon surface.
• Drying: Let the handles air-dry completely before putting them away. Do not use direct heat sources such as radiators, hair dryers, or strong sunlight.
• Storage: Store the set in a dry, cool place away from direct sunlight, preferably in a ventilated bag or case, so the carbon parts are not pressed out of alignment.
• Inspection: Regularly check the handles, joints, and mounting screws for wear, cracks, or looseness, and tighten or replace them as needed before using the wing.
• Transport: Avoid hard impacts and heavy pressure on the handles during transport, as point loads can damage the carbon structure.

What’s included in the Duotone Handle Fusion Set?

The set includes two handles: a front grip and a rear handle, which together replace the wing’s standard handles. Choose the front grip in size M (43 cm) or L (55 cm), while the rear handle is always 31 cm long.

Which size front grip should I choose?

Size M (43 cm) fits wings from 2.5 to 3.0, while size L (55 cm) fits wings from 3.5 to 8.0. Choose based on your wing size to get the right balance and grip length.

Do the handles fit all Duotone wings?

The set is designed for Duotone Unit and Ventis wings from the SS25 and SS26 seasons. The 31 cm rear handle fits all wing sizes.

What material are the handles made of?

The handles feature an oval carbon construction that provides low weight and high stiffness, combined with an ergonomic pistol grip.

Why is the connection to the strut flush?

The redesigned, flat transition to the strut creates a seamless connection between the handle and the wing. This removes edges and the risk of your hands getting caught while handling it.

Are the handles difficult to install?

No, the set is installed on the wing’s strut in place of the original handles. Users describe the installation as simple, and it attaches using the wing’s standard handle fastening.

How do I care for the carbon handles?

Rinse them with fresh water after use, let them dry in the shade, and store them in a cool, dry place. Avoid solvents and regularly check the joints and screws for wear.