Duotone Grip 3 SLS 2025

Caring for your windsurf board

Rinse the board thoroughly with fresh water after every session, especially after use in salt water, as salt corrosion can damage fins, boxes, and fittings over time. Dry the board completely with a soft cloth and let it dry in the shade - avoid prolonged exposure to direct sunlight, as UV rays can degrade both the laminate and the graphics.

• Washing: Always rinse the board, fins, and fittings with fresh water, and remove sand and salt from the fin boxes and mast track.
• Drying: Let the board air-dry in the shade. Never use heaters or high-pressure washers near the surface.
• Storage: Store the board lying down or standing up in a dry, cool, shaded place, preferably in a padded board bag. Remove the fins after use to avoid pressure damage to the boxes and fins.
• Transport: Protect the board during transport with a board bag, and never tighten the straps so much that the laminate deforms.
• Repairs: Small areas of damage to the laminate should be repaired quickly to prevent water ingress. Use a suitable repair kit in colors that match the board's top and bottom.

What is the Duotone Grip 3 SLS?

It’s a World Cup wave board with a fully dedicated thruster setup, built using lightweight Full Custom SLS technology and developed together with Duotone’s PWA riders.

What sizes is the board available in?

The Grip 3 SLS 2025 is available in four sizes: 79, 85, 95, and 108 liters, so you can choose the model that suits your weight and conditions.

What do SLS and Full Custom technology mean?

SLS stands for Strong-Light-Superior: The board is laminated using Full Custom technology, making it about 200 g lighter and stronger than a classic semi-custom construction.

When should I choose the Grip 3 over the Grip 4?

Choose the Grip 3 if you want faster acceleration and tighter, more controlled turns thanks to the thruster setup. The Grip 4, on the other hand, offers maximum grip and drive in long rail-to-rail turns, even in big waves.

Is the board only for professionals?

The shapes are designed for competition, but their balance, versatility, and wide wind range make them suitable for any experienced wavesurfer looking to develop their wave and jump technique.

Is the Grip 3 suitable for bump & jump?

Yes. Its efficient rocker and low drag in the entry make the board fast and controllable, which is especially helpful in jumping-oriented conditions.

How can I best take care of the board?

Rinse it with fresh water after use, let it dry in the shade, store it in a padded board bag out of direct sunlight, and remove the fins after sailing.

Is the board ready to use straight out of the box?

Yes, the concept is deliberately plug & play: The fin setup is tuned at the factory, and all adjustments are made easily via the center fin—just mount it and sail.