ION Wing Harness Line Vario

Maintaining the ION Wing Harness Line Vario

Rinsing: Rinse the line in fresh water after every session, especially after use in salt water. This removes salt crystals, salt and dirt that can degrade the material over time.

Drying: Let the product air-dry in the shade, hanging or laid flat. Avoid direct sunlight, radiators and other heat sources, as they can damage the polyurethane and polyamide materials.

Storage: Store the line dry, clean and untangled or loosely coiled in a cool place away from UV light. Don’t leave it in a closed, damp car or bag for long periods.

General: Avoid contact with sharp edges and harsh chemicals. Regularly check the protective tube, adjustment system and attachment points for wear before use.

What lengths can the ION Wing Harness Line Vario be adjusted to?

The line comes in one size and can be adjusted continuously from 26" to 34", or about 66 to 86 cm. This means you can fine-tune the length as you switch wing or change your riding style.

Does it fit my wing?

Yes, the line fits all wing booms. It can also be attached to handles and loops, so it works with most setups.

Do I need to use it with a specific harness?

The line is designed for the ION Rogue wingfoil harness, but you can use it with any wing harness or a belt with a hook, such as the ION Wing Hip Belt.

What are the advantages of an adjustable harness line over a fixed one?

With a vario line, you can adjust the length to each wing size and your position on the board. This gives you more freedom if you ride with several wing sizes or are still figuring out which length suits you best.

What is the line made of?

The composition is 60% polyurethane, 30% polyamide, and 5% thermoplastic polyurethane. A durable protective tube on the outside shields the line from rubbing against the boom.

How do I maintain the harness line?

Rinse it with fresh water after use, especially after using it in salt water, and let it dry in the shade. Store it in a dry place out of direct sunlight, and regularly check the adjustment system and protective tube for wear.

Is the line difficult to install?

No, the line attaches directly to the boom, handle, or loop on your wing. No tools are required, and you can move it between wing in just a few minutes.